Pallet Rack Anchors
Concrete anchors for pallet racking: 1/2″ × 4-1/4″ wedge anchors, 1/2″ × 4″ Tapcons and 3/8″ × 4″ Red Head wedge anchors.
Upright Braces & Replacement Columns
Rack Accessories & Hardware
Replacement pallet rack horizontal and diagonal braces (24″–48″) and upright columns (8′–20′) for frame repairs and expansions.
When an upright is damaged, replacing the bent brace or column is often faster and less expensive than a whole new frame. We stock braces in every common frame depth and columns in the most-used heights.
- Braces: horizontal and diagonal, 24″, 36″, 42″, 48″
- Columns: 8′, 10′, 12′, 16′, 20′
- Green or blue to match your frames
Rack Accessories & Hardware
PriceRequest pricing
Volume and project pricing available. In stock in Longwood, FL and Houston, TX · delivery, installation & nationwide shipping.
Get a quote for this product
Specifications
Sizes & specifications
| Part | Sizes |
|---|---|
| Horizontal braces | 24″, 36″, 42″, 48″ (green, blue) |
| Diagonal braces | 24″, 36″, 42″, 48″ (green, blue) |
| Upright columns | 8′, 10′, 12′, 16′, 20′ (green, blue) |
| Frame spacers | In stock |
| Component | Certified material & mill-tested results |
|---|---|
| Frame braces (0.071″ C-channel) | 1.8 mm (0.071″) hot-rolled coil · IS 2062:2011 E250A · minimum yield 350 MPa (51 ksi) · minimum tensile 410 MPa (59 ksi) |
| Certification | EN 10204 3.1 mill test certificates from BIS-licensed mills; copies available on request |
Can a damaged pallet rack upright be repaired?
Damaged braces and columns can often be replaced individually. Any upright with a bent or creased column should be unloaded until repaired. Send photos and we’ll advise.
More Rack Accessories & Hardware
Complete the system
Pallet Rack Foot Plates
Pallet rack foot plates for 3″ columns: a 3″ × 5″ formed foot plate and a 5″ × 8″ base plate in 10 mm (3/8″) ASTM A572 Grade 50 steel with a welded column socket.
Pallet Rack Row Spacers
Pallet rack row spacers in 6″, 12″, 18″ and 24″ lengths, formed from 2 mm (14 ga) steel.
Pallet Rack Flue Guards
Pallet rack flue guards in 6″, 12″ and 18″ sizes, formed from 3 mm (11 ga) steel with a 5″-tall raised section.
Rack Bolts & Hardware
Pallet rack hardware in stock: racking bolts, serrated nuts, foot bolts and washers, and Grade 5 hex bolts and nuts for cantilever.
Rack Post Protectors
Floor-anchored pallet rack post protectors in 12″ and 16″ heights, in 4 mm, 5 mm and 6 mm steel, including models made to fit 3″ × 5″ and 5″ × 8″ foot plates.
End-of-Aisle Rack Guards
End-of-aisle rack guards in left- and right-hand versions: a 10 mm (3/8″) steel angle, 47.5″ long, with a 12″-tall 8 mm steel hoop at one end and five anchor holes.
Pallet Support Bars
Pallet support bars, 42.1″ long with hooked ends, in 1.75″ and 3.23″ widths, formed from 1.5 mm (16 ga) steel.
M-Bar Pallet Rack Dividers
48″ × 36″ M-bar pallet rack dividers made from 1″ steel tube with two formed 3 mm steel clips.
Reel Rack Assemblies
Made-to-order reel rack assemblies in left- and right-hand versions: a 2″ × 3″ × 42″ steel tube with 1/4″ wall, 6″ mounting brackets and a pipe holder, from mill-certified steel.
Ready to plan your racking?
Send us your space and what you store. We’ll come back with a layout and a quote.
or call (386) 261-8959