Long-load storage
Cantilever racking for lumber, pipe, tube and sheet goods
Cantilever racking stores long and awkward loads with no front uprights in the way, so material of any length can be loaded from the side with a forklift or by hand.
We supply both light-duty cantilever for shops and contractors and structural steel systems for lumber yards, steel service centers and distribution. Build single-sided runs against a wall or double-sided runs down the middle of your building.
- Columns: 10′, 12′, 16′ and 20′
- Arms: 36″, 48″, 52″ and 60″ straight arms
- Bases & brace sets matched to the column and arm capacity
- Pipe stops: 12″ pipe stops fit on the arm tip to keep pipe, tube and other round material from rolling off
- Single or double sided, including complete ready-to-install set-ups
- Custom dimensions available: column heights and arm lengths
Shop by product
Cantilever Racking products
Cantilever Rack Columns
Structural steel cantilever rack columns in 10′, 12′, 16′ and 20′ heights, single or double sided, for lumber, pipe and long-load storage.
Cantilever Rack Arms
Straight structural steel cantilever arms in 36″, 48″, 52″ and 60″ lengths, plus 4′ light-duty arms, for storing lumber, pipe and bar stock.
Cantilever Bases & Brace Sets
Structural cantilever bases (48″, 52″, 60″) and brace sets (48″, 60″, 72″ and 96″ stocked) to anchor and stabilize cantilever runs.
Light-Duty Cantilever Racking
Light-duty double-sided cantilever racking with 10′ columns and 4′ arms for shops, contractors and lumber or conduit storage.
In stock & available
Sizes & specifications
Common sizes we stock or source. Don’t see your size? Ask. We can usually match it.
| Component | Available |
|---|---|
| Columns | 10′, 12′, 16′, 20′ |
| Arms (straight) | 36″, 48″, 52″, 60″ |
| Bases | 48″, 52″, 60″ |
| Brace sets | 48″, 60″, 72″ and 96″ stocked; other sizes on request |
| Pipe stops | 12″, fit on the arm tip |
| Colors | Dark blue, light blue, orange |
| Hardware | Grade 5 hex bolts and nuts (5/8″ and 3/4″) |
| Component | Available |
|---|---|
| Columns | 10′ double sided |
| Arms | 4′ |
| Bases | Double-sided base |
What is cantilever racking used for?
Anything long, bulky or irregular: lumber, pipe, tubing, bar stock, conduit, sheet goods and furniture. Anything that doesn’t fit on a pallet or would be blocked by a front upright.
Do I need pipe stops on cantilever arms?
For pipe, tube, conduit and any round material, yes. Pipe stops fit on the arm tip and keep product from rolling off the rack. We stock 12″ pipe stops.
Single sided or double sided?
Single-sided runs go against a wall; double-sided runs sit in the middle of the floor with access from both aisles, roughly doubling capacity for the same floor footprint.
Related solutions
Complete the system
Pallet Racking
Selective pallet rack systems with uprights from 4′ to 40′ tall and step beams from 4′ to 12′.
Explore Pallet RackingWire Decking
Wire decks in 24″, 36″, 42″ and 48″ depths to support loads and meet fire code.
Explore Wire DeckingShelving & Work Benches
Pre-configured shelf kits, boltless rivet shelving and work bench uprights for parts rooms and light storage.
Explore Shelving & Work BenchesUsed Racking
Quality used beams and uprights that cut project cost and lead time without cutting corners.
Explore Used RackingRack Accessories & Hardware
Row spacers, flue guards, post protectors, end-of-aisle guards, pallet support bars, foot plates, anchors and hardware.
Explore Rack Accessories & HardwareReady to plan your racking?
Send us your space and what you store. We’ll come back with a layout and a quote.
or call (386) 261-8959