Cantilever Rack Columns
Structural steel cantilever rack columns in 10′, 12′, 16′ and 20′ heights, single or double sided, for lumber, pipe and long-load storage.
Cantilever Racking
Structural cantilever bases (48″, 52″, 60″) and brace sets (48″, 60″, 72″ and 96″ stocked) to anchor and stabilize cantilever runs.
Bases anchor each column and resist the tipping force of loaded arms, so base length must be matched to arm length. Brace sets connect columns into a rigid run and set column spacing.

Volume and project pricing available. In stock in Longwood, FL and Houston, TX · delivery, installation & nationwide shipping.
Specifications
| Component | Available |
|---|---|
| Bases | 48″, 52″, 60″; light-duty double-sided base |
| Brace sets (stocked) | 48″, 60″, 72″, 96″ |
| Other brace sizes | Available on request |
| Hardware | 5/8″ and 3/4″ Grade 5 hex bolts and nuts |
| Component | Certified material & mill-tested results |
|---|---|
| Brace angles | ISA 50 × 50 × 5 angle (approx. 2″ × 2″ × 3/16″) · IS 2062:2011 E350A · minimum yield 350 MPa (51 ksi) · minimum tensile 410 MPa (59 ksi) |
| Certification | Mill test certificates from BIS-licensed mills; copies available on request |
Bases are typically the same length as, or slightly longer than, the arms, so the loaded arms can’t tip the column. 48″ arms usually pair with a 48″ or longer base.
More Cantilever Racking
Structural steel cantilever rack columns in 10′, 12′, 16′ and 20′ heights, single or double sided, for lumber, pipe and long-load storage.
Straight structural steel cantilever arms in 36″, 48″, 52″ and 60″ lengths, plus 4′ light-duty arms, for storing lumber, pipe and bar stock.
Light-duty double-sided cantilever racking with 10′ columns and 4′ arms for shops, contractors and lumber or conduit storage.
Send us your space and what you store. We’ll come back with a layout and a quote.
or call (386) 261-8959