Cantilever Rack Columns
Structural steel cantilever rack columns in 10′, 12′, 16′ and 20′ heights, single or double sided, for lumber, pipe and long-load storage.
Cantilever Rack Arms
Cantilever Racking
Straight structural steel cantilever arms in 36″, 48″, 52″ and 60″ lengths, plus 4′ light-duty arms, for storing lumber, pipe and bar stock.
Cantilever arms extend from the column to carry the load. Arm length should match the depth of the material you store; arm count and spacing are set by how flexible the load is.
Pipe stops fit on the arm tip to keep round stock from rolling off.
- Structural arms: 36″, 48″, 52″, 60″ straight
- Light-duty arms: 4′
- 12″ pipe stops for round material
- Custom arm lengths available
- I-beam arms in IS 2062 E350A high-strength steel
Cantilever Racking
PriceRequest pricing
Volume and project pricing available. In stock in Longwood, FL and Houston, TX · delivery, installation & nationwide shipping.
Get a quote for this product
Specifications
Sizes & specifications
| Spec | Available |
|---|---|
| Structural lengths | 36″, 48″, 52″, 60″ |
| Light-duty length | 48″ (4′) |
| Style | Straight |
| Accessories | 12″ pipe stops |
| Component | Certified material & mill-tested results |
|---|---|
| Structural arms | ISMB 100 × 68 I-beam (approx. 3.9″ × 2.7″) · IS 2062:2011 E350A · minimum yield 350 MPa (51 ksi) · minimum tensile 410 MPa (59 ksi) |
| Certification | Mill test certificates from BIS-licensed mills; copies available on request |
What length cantilever arm do I need?
Match arm length to load depth. Arms should be at least as long as the material is deep, never shorter. A bundle of lumber 42″ deep goes on 48″ arms.
Do I need pipe stops?
For pipe, tube, conduit and any round material, yes. Pipe stops at the arm tip keep product from rolling off the rack.
What are your structural cantilever arms made from?
Structural arms are cut from ISMB 100 × 68 I-beam (about 3.9″ × 2.7″) in IS 2062 E350A high-strength steel. Certified to a minimum yield 350 MPa (51 ksi) and minimum tensile 410 MPa (59 ksi).
More Cantilever Racking
Complete the system
Cantilever Bases & Brace Sets
Structural cantilever bases (48″, 52″, 60″) and brace sets (48″, 60″, 72″ and 96″ stocked) to anchor and stabilize cantilever runs.
Light-Duty Cantilever Racking
Light-duty double-sided cantilever racking with 10′ columns and 4′ arms for shops, contractors and lumber or conduit storage.
Ready to plan your racking?
Send us your space and what you store. We’ll come back with a layout and a quote.
or call (386) 261-8959